Towertalk
[Top] [All Lists]

Re: [TowerTalk] M2 Readout Loosing Pulses ?

To: W6RU@aol.com;
Subject: Re: [TowerTalk] M2 Readout Loosing Pulses ?
From: Jim W7RY <w7ry@centurytel.net>
Date: Sun, 26 Jun 2005 21:25:54 -0700
List-post: <mailto:towertalk@contesting.com>
Quite a bit of capacitance in that much RG-58. Perhaps that's the problem?

73
Jim W7RY
At 06:06 PM 6/26/2005, you wrote:
>It looks like I am having the problem I was warned might happen .... with a
>long run of rotor cable (abt 275 feet of RG-58U for reed switch) I am 
>loosing
>pulse counts and the direction indicator is loosing calibration. Anybody else
>  had this problem and found a fix for it ?
>TNX,
>Terry W6RU
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>