>Yesterday I removed a TX2 rotor form my tower. One of the Stainless
>steel mount bolts I guess galled in the hole and I had to break off the
>head of the bolt to get the rotor out of the tower.
stainless galls to stainless. it's pbly corroded
so you have the threaded part left to grip on to?
as suggest, a heat may help.
i had to drill one out and then retap the thread. i use silver anti
seize on everything now.
73, Craig Clark, K1QX
RADIOWARE AND RADIO BOOKSTORE
PO BOX 209
RINDGE NH 03461
603 899 6957
WWW.RADIO-WARE.COM
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|