See my notes on turning faster one way than the other at:
http://www.k1ttt.net/technote/yaesu.html#funnyspeed
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of el34guy@aol.com
> Sent: Friday, October 28, 2005 16:17
> To: towertalk@contesting.com
> Subject: [TowerTalk] yaesu rotor control question
>
> Im putting up an RD-1800 rotor using the Yaesu 1000 rotor control box and
> am getting great DC voltage(and rotation) going CCW, but when going
> CW(clockwise) voltage drops to 0 after about 1.5 secs so it almost stops
> immediately. Anyone had this problem before on the Yaesu controller? Any
> recommendations? Thanks 73
>
> Mark
> W0NCL
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|