Hi,
A simple question on station grounding. I have a copper wall plate for common
grounding of all of my station equipment. I have 2" wide copper strap to
connect each piece of gear to the copper panel. Most pieces of equipment have
a simple bolt for grounding. Seems to me that a single/small bolt connection
to the copper strap is not a very good connection. Any suggestions here?
Should I simply be connecting the 2" copper strap to the grounding bolt of each
piece of gear or is there a better method?
Thanks,
Richard Harris - KJ7CU
Also, thanks to all those that gave me advice on my 160M shunt-fed tower.
Working great. A lot of work but well worth the effort
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|