Towertalk
[Top] [All Lists]

Re: [TowerTalk] Help with 80 meter temp antenna

Subject: Re: [TowerTalk] Help with 80 meter temp antenna
From: Jan Erik Holm <sm2ekm@telia.com>
Date: Fri, 20 Oct 2006 06:49:17 +0200
List-post: <mailto:towertalk@contesting.com>
What ever did happen to N7ML? I used to work him all the time
on 80m LP but all of a sudden he was gone, I haven´t heard him
in years.

73 Jim SM2EKM
------------------------------------------------------------------
K7LXC@aol.com wrote:
>  
> In a message dated 10/19/2006 12:26:30 P.M. Pacific Daylight Time,  
> towertalk-request@contesting.com writes:
> 
>>  A beam made from inverted vees won't work very well at low  height. 
> However if you can keep the ends at about 50 ft above ground it  should 
> do pretty good.  It will be a killer for stateside, but even  for DX a 2 
> element version should outperform a single vertical in one  direction. 
> This antenna takes up a LOT of  space.
> 
> 
> 
> N7ML in Montana had two  195' rotating towers and he put a catenary between 
> them. The towers were inline  to EU and he put a 6 element 75M wire beam 
> (inverted vees) on it. I listened to  SP7GIQ one morning during the ARRL DX 
> CW tests 
> and he was S8-9 - wow. Mike also  had a 2 element bobtail that only heard 
> noise. It was pretty impressive. Highly  recommended if you can do it!
>  
> Cheers,
> Steve    K7LXC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>