Towertalk
[Top] [All Lists]

Re: [TowerTalk] W2DU Balun Bead Source

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] W2DU Balun Bead Source
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Tue, 09 Jan 2007 17:23:21 -0800
List-post: <mailto:towertalk@contesting.com>
On Tue, 09 Jan 2007 14:17:21 -0600, Cecil Moore wrote:

>you get more balun for the money with multi-turn toroids. 
>Multi-turn toroids yield a choking impedance proportional to 
>the square of the number of turns. Turns are cheap. W2DU baluns
>yield a choking impedance proportional to the number of beads. 
>Beads are expensive.

VERY good advice. As it turns out, I'm about 90% done with a 
tutorial on RFI and ferrites that includes a discussion of baluns, a 
lot of measured data, and specific advice on troubleshooting RFI and 
"rolling your own" choke baluns. It is on my website as an "advanced 
first draft." You can download it as a pdf.

http://audiosystemsgroup.com/RFI-Ham.pdf  

Comments are appreciated. 

73,

Jim Brown K9YC



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>