Towertalk
[Top] [All Lists]

[TowerTalk] Fiberglass Rod - Current Situation

To: towertalk@contesting.com
Subject: [TowerTalk] Fiberglass Rod - Current Situation
From: Stan Stockton <k5go@cox.net>
Reply-to: stan@aqity.org
Date: Sun, 1 Apr 2007 20:47:44 -0500
List-post: <mailto:towertalk@contesting.com>
I was in the mood to purchase fiberglass rod to guy my towers and may still do 
it - not sure.  In case anyone is wanting to purchase this stuff, I have some 
good information about the current situation for 3/8" material:

About three and a half years ago a group made a purchase from Polygon Company 
(5000 foot minimum) and the price was $.38 per foot.  There may have been other 
orders since - don't know.  

I got a quote from Polygon a few weeks ago and they raised their price to 
something like $.65 per foot.  They had always provided it in hand rolled coils 
that were something like 6-8 foot in diameter.  

Meanwhile I found two other companies who quoted it.  One was $.45 per foot but 
would not roll it up and did not have the ability to put it on reels.  They 
would only provide it in 20 foot lengths, so forget that.  

The other company will only provide it on reels (better for shipping) and the 
price is $.29 per foot for 5.000 - 10,000 feet.  The charge is $100.00 for each 
reel so if you wanted to buy 5000 feet and have two reels of 2500 feet their 
price is $.29 per foot plus $200.00.

If I did everything I wanted to do I would need about 6,000 feet but for now 
would probably go for buying about 2500 feet and and finish the job later if 
one or more wanted to place an order with me.  It might be good for the future 
availability of this material at a reasonable price to get this company "in the 
groove". 

Specs are 3/8" , 100-120K PSI tensile strength, approximate breaking strength 
at 11,000 lbs plus, UV inhibitors, white color.  Let me know off the reflector 
if you are interested.  We could get the sales guy I have been talking to on 
the phone and work out the details.    The company is Tencom and they are 
located in Holland, OH near Toledo.

The grips apparently are sold direct from PLP and their minimum is $500.  I 
think it was about a year ago when I last checked and the price was about $9.00 
for the one made for 3/8" fiberglass rod.  

Stan, K5GO

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Fiberglass Rod - Current Situation, Stan Stockton <=