Yes, you can make the stop anywhere you want it. Though with the overlap I
find the north stop to be ok. The only thing that will be wrong if you
change the stop are the markings on the preset pot.
The dial lamp is an axial lead incandescent bulb that they run on 10vac.
You can buy them from Yaesu parts/service.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of N2TK, Tony
> Sent: Sunday, November 04, 2007 12:50
> To: towertalk@contesting.com
> Subject: [TowerTalk] Yaesu - 2700 and 3800 rotors
>
>
> I do not have the manuals for these rotors and I didn't find the info I
> needed on Yaesu's web site.
> What bulb is used for the dial lamp?
> Can the 2700 be changed from North end-of-rotation to South end-of
> rotation?
> If so, how?
>
> Tnx for feedback.
>
> N2TK, Tony
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|