Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna/tower Equipment Box

To: Pete Smith <n4zr@contesting.com>
Subject: Re: [TowerTalk] Antenna/tower Equipment Box
From: Richards <jruing@ameritech.net>
Date: Tue, 10 Feb 2009 13:04:50 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yeah... Roger had bees or wasps or the like in one of his antenna
baluns... a similar problem.    I forget what he used to fill the box,
and still keep the moisture and bugs out, while letting the thing breathe.
Otherwise, some guys pot the entire box in epoxy - keeps bugs and
moisture out, but is somewhat permanent.

They sell this certain coarse fiber product news's and crannies along 
your residential baseline, to keep the critters and bugs from crawling 
up into your house, like into the base of your sighting, or where there 
are little cracks or fissures, or separations etc. and this allows the 
area to breathe, while keeping the critters out.

An idea I had for an affordable antenna connection box is to use an 
outdoor electrical power receptacle cover, and drill out the inner plate 
to accept SO-239 connectors  (and one F connector)  and use a bulkhead 
connector or similar SO-239 on a face plate inside.   A metal plate can 
be drilled out to go under the mounting screws as a common grounding 
plate.  I can show pictures if  any one is interested...

Inexpensive, weather tight, and wife-approved design.

===============    Richards - K8JHR  ====================

Pete Smith wrote:

So far no bugs, no
> critters.  A previous incarnation had relay boxes full of ants in only a 
> couple of months.
> 
>====================================================
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>