That's what I did. I had several lines (6 coax, rotator cable, and a
light 4 conductor cable). I added a brace to help support the top coax
standoff. All the weight of the coax is supported by that standoff.
It's been fine fir 15 years.
Dick, K6KR
Sent from my iPhone
On Jul 20, 2009, at 6:00 PM, "wtrone" <wtrone@bellsouth.net> wrote:
> I am in the final stages of assembling my new U. S. Towers MA-850
> with
> rotor base. I am going to use a Kellems grip to secure the LM-400
> coax and
> SteppIR control wire. I was wondering how the rest of you have done
> this?
> How did you attach the grip to the tower/ antenna. I was considering
> securing the Kellems grip to the very top coax stand off. Since I
> have the
> rotor base, the tower and antenna turn together.
>
> The antenna is a 3 element SteppIR with the 40/30 add on.
>
> So, how have you attached the grip for best results?
>
> Bernard, WA4OEJ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|