Chuck:
You have convinced me to change the 1/8" ropes to the wire. I need to add a few
more runs to each of the conduits this summer and when I do I will make the
switch. Thanks for the idea.
73, Tod, K0TO
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of KI9A@aol.com
> Sent: Monday, July 27, 2009 6:23 PM
> To: tod@k0to.us
> Cc: towertalk@contesting.com
> Subject: Re: [TowerTalk] Cable Runs
>
> As a construction Electrician the past 25 years, the only
> thing I can add to Tod's install is to pull a #10 or #10
> stranded THHN wire in the conduit, instead of a rope, or
> string. It's been my experience, that using a string or rope
> for future pulls is not a good idea. The rope will ALWAYS
> wrap around other cables, and when you pull it out, it WILL
> burn thru insulation.
> If you use a wire ( and lots of lube like Tod says), it'll
> slip right past the others.
>
> Hi idea of separating the 120 volts from the other cables is
> GREAT idea also. Plus, the electrical code prohibits that,
> unless the insulation on the control cable is rated for same
> voltage ( i.e. 600 volts).
>
> Tod, sounds like a great install! I would follow his advice!
>
> 73- Chuck KI9A
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|