But why, with an antenna that expensive, should you have to? Why
shouldn't it be okay as is, without special taping or handling of the
parts? Just curious, and I'm not a Steppir guy or a log guy. Building
another quad here.
Mike, k5wmg
Pipe Creek, Texas
Fast cars, slow boats, big dogs, and summers off to write
On Sun, Jan 24, 2010 at 9:52 AM, Ronald Anderson <w9rma@charter.net> wrote:
> I just helped a friend move his SteppIR from one location to another.
> In doing so we replaced all of the boots and we then took and wrapped
> both ends of the boot with 3M-88 tape and then went back and taped the
> whole boot itself so that it is completely covered with 3M-88 tape.
> Hopefully we won't have to do it again for x? years. We find that
> the 3M-88 or 33 will last for years in our northern climate of WI.
> Ron W9RMA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|