I recently replaced the winch and cable for my ST-77 Wilson tower with
one from Cabella's (found in boat trailer accessories). The electric model
they had was the same manufacturer used by the OEM back in 1980. FYI...
Mike K9MK
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dale M. Schwartz
Sent: Monday, July 12, 2010 6:59 PM
To: towertalk@contesting.com
Subject: [TowerTalk] WINCH
I believe that the price they charge is for the entire tilt-over section
(which I have). The actual winch is cheap. I recently replaced one for
about $75.00, but it won't work unless you have the tile-over leg for the
tower. Now mine is the "flagpole" tower; I can't speak to the regular type
of tower they sell.
DALE K4ROZ
----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of
towertalk-request@contesting.com
Sent: Monday, July 12, 2010 3:01 PM
To: towertalk@contesting.com
Subject: TowerTalk Digest, Vol 91, Issue 27
Send TowerTalk mailing list submissions to
towertalk@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/towertalk
or, via email, send a message with subject or body 'help' to
towertalk-request@contesting.com
You can reach the person managing the list at
towertalk-owner@contesting.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of TowerTalk digest..."
Today's Topics:
1. Re: best way to shine up an old yagi? (D Calder)
2. Re: best way to shine up an old yagi? (Roger (K8RI))
3. Re: best way to shine up an old yagi? (Roger (K8RI))
4. Re: best way to shine up an old yagi? (David Gilbert)
5. Harbor Freight WInch (mcelmer1)
6. Re: Harbor Freight WInch (Michael Goins)
----------------------------------------------------------------------
Message: 1
Date: Mon, 12 Jul 2010 13:25:07 -0400
From: "D Calder" <towertalk@n4zkf.com>
Subject: Re: [TowerTalk] best way to shine up an old yagi?
To: <towertalk@contesting.com>
Message-ID: <003a01cb21e7$2c39f970$84adec50$@n4zkf.com>
Content-Type: text/plain; charset="utf-8"
Scotchbrite came back and bit me some years ago. The "metal in it" got in
the pits of elements and actually made the antenna look like it rusted a
month later. Even though it wasn't the aluminum, it was the metal in the
pad. They make brass pads too.
I had to take it down, use 400 grit to get it out and then clear coated it
and it's been up for some time now. It stops it from deteriorating when you
live 900 ft. from the ocean when it's covered with something. I have some
that have been up 7 to 8 years and that's a good bit next to the sea salt.
73 Dave n4zkf
n4zkf@n4zkf.com
www.n4zkf.com
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of n8de@thepoint.net
Sent: Monday, July 12, 2010 1:08 PM
To: Eric Dobrowansky K2WD
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] best way to shine up an old yagi?
You can rub it with Scotchbrite pads to remove surface oxidation, especially
where parts join, but WHY would you want it to 'shine'
otherwise?
It will work fine 'dull'.
73
Don
N8DE
Quoting Eric Dobrowansky K2WD <k2wd@comcast.net>:
>
>
> Any recommendations on the best way to shine up a yagi that has been
> lying unassembled under weeds and leaves for a number of years? I
> just picked up a used M2 20m yagi, and want to "shine it up" a
> little before installing it. Any recommendations appreciated.
>
>
>
> Thanks,
>
>
>
> Eric
> K2CB
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Message: 2
Date: Mon, 12 Jul 2010 14:14:59 -0400
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] best way to shine up an old yagi?
To: towertalk@contesting.com
Message-ID: <4C3B5BA3.8070607@tm.net>
Content-Type: text/plain; charset=UTF-8; format=flowed
On 7/12/2010 1:08 PM, n8de@thepoint.net wrote:
> You can rub it with Scotchbrite pads to remove surface oxidation,
> especially where parts join, but WHY would you want it to 'shine'
> otherwise?
> It will work fine 'dull'.
>
I was wondering that. Force 12 advertises they tumble parts so they are not
highly reflective.
Of course being in the grass and weeks it probably needs a good cleaning.
73
Roger (K8RI)
> 73
> Don
> N8DE
>
> Quoting Eric Dobrowansky K2WD<k2wd@comcast.net>:
>
>
>>
>> Any recommendations on the best way to shine up a yagi that has been
>> lying unassembled under weeds and leaves for a number of years? I
>> just picked up a used M2 20m yagi, and want to "shine it up" a little
>> before installing it. Any recommendations appreciated.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Eric
>> K2CB
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
------------------------------
Message: 3
Date: Mon, 12 Jul 2010 14:34:22 -0400
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] best way to shine up an old yagi?
To: towertalk@contesting.com
Message-ID: <4C3B602E.7070603@tm.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On 7/12/2010 2:14 PM, Roger (K8RI) wrote:
>
> On 7/12/2010 1:08 PM, n8de@thepoint.net wrote:
>
>> You can rub it with Scotchbrite pads to remove surface oxidation,
>> especially where parts join, but WHY would you want it to 'shine'
>> otherwise?
>> It will work fine 'dull'.
>>
>>
> I was wondering that. Force 12 advertises they tumble parts so they
> are not highly reflective.
> Of course being in the grass and weeks it probably needs a good cleaning.
>
>
ERRR... That should have said: being in the grass and "weeds" it probably
needs a good cleaning.
73
Roger (K8RI)
> 73
>
> Roger (K8RI)
>
>> 73
>> Don
>> N8DE
>>
>> Quoting Eric Dobrowansky K2WD<k2wd@comcast.net>:
>>
>>
>>
>>> Any recommendations on the best way to shine up a yagi that has been
>>> lying unassembled under weeds and leaves for a number of years?
>>> I just picked up a used M2 20m yagi, and want to "shine it up" a
>>> little before installing it. Any recommendations appreciated.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Eric
>>> K2CB
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
>>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
------------------------------
Message: 4
Date: Mon, 12 Jul 2010 11:43:25 -0700
From: David Gilbert <xdavid@cis-broadband.com>
Subject: Re: [TowerTalk] best way to shine up an old yagi?
To: towertalk@contesting.com
Message-ID: <4C3B624D.5040408@cis-broadband.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Same thing I was wondering. I went out of my way to paint my tower and
yagis with dark camouflage colors to make them less obtrusive for the
neighborhood, and everything is four acre parcels here.
Check out the top picture at http://ab7e.com/AB7E_Antenna_Page_5.html
73,
Dave AB7E
On 7/12/2010 10:08 AM, n8de@thepoint.net wrote:
> You can rub it with Scotchbrite pads to remove surface oxidation,
> especially where parts join, but WHY would you want it to 'shine'
> otherwise?
> It will work fine 'dull'.
>
> 73
> Don
> N8DE
------------------------------
Message: 5
Date: Sun, 11 Jul 2010 13:04:56 -0600
From: "mcelmer1" <mcelmer1@netecin.net>
Subject: [TowerTalk] Harbor Freight WInch
To: <towertalk@contesting.com>
Message-ID: <25CB1ED6ED494C9EBFBD3ABE0FB843EA@ENG6100>
Content-Type: text/plain; charset="iso-8859-1"
Any thoughts on using a Harbor Freight winch for a U.S. Tower 55 ft
crankup??
I think the one sold by U.S. Towe is around $1200 versus $150 for the Harbor
Freight model.
Mike
W8TRN
------------------------------
Message: 6
Date: Mon, 12 Jul 2010 13:50:05 -0500
From: Michael Goins <wmgoins@gmail.com>
Subject: Re: [TowerTalk] Harbor Freight WInch
To: mcelmer1 <mcelmer1@netecin.net>
Cc: towertalk@contesting.com
Message-ID:
<AANLkTimRWeftui8RrpiwH1BZ6VHGxy5iX46lpR3Jo8S_@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
I have a 52-SS I am putting up here and it has an AC winch on it. Thinking
about switching to a DC winch, so I am interested in responses regarding
possible winches.
Michael Goins, k5wmg
Professor, Writing
University of Texas at San Antonio
Northwest Vista College
On Sun, Jul 11, 2010 at 2:04 PM, mcelmer1 <mcelmer1@netecin.net> wrote:
> Any thoughts on using a Harbor Freight winch for a U.S. Tower 55 ft
> crankup??
>
> I think the one sold by U.S. Towe is around $1200 versus $150 for the
> Harbor Freight model.
>
> Mike
> W8TRN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
------------------------------
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
End of TowerTalk Digest, Vol 91, Issue 27
*****************************************
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|