Towertalk
[Top] [All Lists]

Re: [TowerTalk] Using 75 ohm cable

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Using 75 ohm cable
From: <john@kk9a.com>
Date: Mon, 19 Jul 2010 21:07:38 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The ZD Engineering product was a combination CATV connector and transformer 
customized for your cable and frequency.  I believe W8ZD stopped 
manufacturing these in the early 00s and to my knowledge no one currently 
makes such a product.  I have some 220MHz ones, but that probably wouldn't 
be of any use to you

John KK9A



To: "'Gregg Seidl'"  <towertalk@contesting.com>
Subject: Re: [TowerTalk] Using 75 ohm cable
From: "Dave Tipton, W5DMT"
Date: Mon, 19 Jul 2010 17:37:38 -0500


Don't see any that work on 2M, but was quite surprised to learn that Array
Solutions sells several products for HF that do just this.

http://www.arraysolutions.com/Products/baluns.htm

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gregg Seidl
Sent: Monday, July 19, 2010 5:33 PM
To: Tower and HF antenna construction topics.
Subject: [TowerTalk] Using 75 ohm cable

 At one time there was a ham , ZD Engineering , I think who made and sold
matching transformers for using 3/4 inch CATV. I would like some to use on
my planned 6 meter EME array. I can't seem to find these anymore. Can
someone help me out?  Can I make my own?

  Gregg  K9KL 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>