Hi Guys
Thank you for all the replies, some great ideas there. Also, particular thanks
to Ian GM3SEK for the .pdf - just what I was looking for Ian, and cheap too :)
73, Jack
> Date: Thu, 18 Aug 2011 09:15:13 +0100
> To: towertalk@contesting.com
> From: gm3sek@ifwtech.co.uk
> Subject: Re: [TowerTalk] Inverted vee mounted above HF Yagi
>
> Jack White wrote:
> >
> >Hi Guys
> >
> >I have a standard 60ft Versatower with a Yaesu G-1000 and bearing
> >mounted at the top, and just above this I have a Cushcraft A3WS (pic on
> >QRZ). I want to extend the stub mast about 20ft above the A3WS to
> >support the centre of a 160/80/40 trapped inverted vee. I'm looking for
> >some type of mount that will allow me to mount the centre of the
> >inverted vee at the top of the stub mast and remain fixed whilst the
> >stub mast rotates. Ideas/advice would be great.
> >
> >
> >73, Jack G8DX
> >
>
> 'Over the Top' - the 'In Practice' column, Radcom, April 2009.
>
> PDF copy on its way...
>
>
> --
>
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|