That’s what I use. BUT I put a rain hat over the top of the bearing. I don't
like the rain puddeling on the top of it. The way it's built, it collets
about 1/4 inch of water. Any piece of UV resistant material will work fine.
73
Jim W7RY
-----Original Message-----
From: Bob K6UJ
Sent: Friday, October 14, 2011 7:21 AM
To: w8zn@comcast.net
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Thrust bearing thread
Terry,
Nice bearing, thanks for the info !
Bob
K6UJ
On Oct 14, 2011, at 4:34 AM, w8zn@comcast.net wrote:
> It has been interesting seeing all the posts about this. The real question
> is why would you ever use a TB3 or TB4 at $161 and $185 (from 3Star) when
> you can have a REAL bearing for only $30.98???? Made with REAL steel,
> seals and a zerk fitting?
>
> Check out
> http://www.thebigbearingstore.com/servlet/the-88/2%22-Four-Bolt-Flange/Detail
>
> A nice 1" thick plate of Delrin with a two inch hole cut in it using a
> hole saw from your local hardware store works really well also - Delrin
> however is way more expensive than these bearings.
>
> Terry Price - W8ZN ex K8ISK
> FM18dv - 1.8MHz thru 47GHz
> K8GP - The Grid Pirates - FM19bb
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|