The isolation is in the number, but so is the line loss.
I'd have to study to get the numbers, but I'll bet someone pops up to tell us.
With a very short open coax, you have 100% reflection, so infinite SWR.
With an very long coax, all the power will be lost on the way out and none will
come back. Presto, SWR=1:1!
So a perfect box out there will look just like the line is open.
If there's some coupling (non isolation), the Z at the end of the line will be
something other than open circuit and SWR will be different.
I guess it will go down, since some energy will go to the nonselected port.
How's that for barnyard analysis?
Wilson
W4BOH
----- Original Message -----
Send TowerTalk mailing list submissions to
towertalk@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/towertalk
or, via email, send a message with subject or body 'help' to
towertalk-request@contesting.com
You can reach the person managing the list at
towertalk-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TowerTalk digest..."
Today's Topics:
1. isolation and SWR (Pete Smith N4ZR)
----------------------------------------------------------------------
Message: 1
Date: Mon, 10 Sep 2012 11:03:04 -0400
From: Pete Smith N4ZR <n4zr@contesting.com>
To: TowerTalk <TowerTalk@contesting.com>
Subject: [TowerTalk] isolation and SWR
Message-ID: <504E0128.2040508@contesting.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Just now, I was fiddling with my homebrew 80m array switchbox. I have
only two dipoles on it at the moment, both reasonably well matched.
Accidentally I switched to one of the unterminated positions, and got an
SWR on the order of 4.5:1 (feeding the dipole switchbox through my
Ameritron RCS-10. By comparison, if I disconnect the feedline inside
the shack, the SWR is in excess of 25:1, and if I switch the RCS-10 to
an unused position, I get 4.5:1.
Is there even an approximate relationship between these various SWR
numbers and the degree of isolation afforded by the two switchboxes?
And probably an even dumber question. If you have two devices in line
and each has (say) 30 dB isolation between a line in use and an unused
one, both of which pass through them both, is the resulting isolation 27
Db? Some other number?
Be gentle - I was a liberal arts major.
--
73, Pete N4ZR
The World Contest Station Database, at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000
------------------------------
Subject: Digest Footer
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
End of TowerTalk Digest, Vol 117, Issue 23
******************************************
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|