[TowerTalk] Coax Seal / Cold Shrink Tubing

["Mike Ryan" <mryan001@tampabay.rr.com>]

Someone placed a link to some Andrew cold shrink tubing that was on eBay. 
Does anyone still have that link saved for that item?  -M
-----Original Message----- 
From: Ken Beals
Sent: Monday, May 20, 2013 2:56 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Coax Seal

Make it even easier: apply the electrical tape with the adhesive side out. 
Then the coax seal (or butyl tape). When sliced it will literally fall off 
the connector.
Ken  K6MR

> From: jms_k1sd@verizon.net
> To: towertalk@contesting.com
> Date: Sun, 19 May 2013 17:18:53 -0400
> Subject: [TowerTalk] Coax Seal
>
> Coax Seal is easy to remove.  Apply one layer of cheap electrical tape 
> over
> the connectors and then cover that with coax seal.  Easy to remove.
>
>
>
>     73 James K1SD
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk