Make it even easier: apply the electrical tape with the adhesive side out.
Then the coax seal (or butyl tape). When sliced it will literally fall off the
connector.
Ken K6MR
> From: jms_k1sd@verizon.net
> To: towertalk@contesting.com
> Date: Sun, 19 May 2013 17:18:53 -0400
> Subject: [TowerTalk] Coax Seal
>
> Coax Seal is easy to remove. Apply one layer of cheap electrical tape over
> the connectors and then cover that with coax seal. Easy to remove.
>
>
>
> 73 James K1SD
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|