Dan,
I currently have a F12 C3 which has plenty of room between the elements
at the mounting point. I did have to slide the boom a bit so my
swinging gate would rotate it around the tower. I do plan in installing
a Tic as well. Using a Tic I would think as long as there was enough
spacing between elements that is wider than the tower itself it would
work, maybe with a couple inch's either way for some wiggle room.
Rich - N5ZC
On 7/12/2013 10:13 AM, Dan Atchison wrote:
I want to stack two tribanders, one on a mast, another on a tic-ring.
That said, I am concerned about tower interaction on certain
tribanders due to its element spacings and the balance point of the
yagi. Surely this has been discussed before, but I've not been able
to find it on searches.
So, that said, who's side-mounted tribanders with tic-rings and what
triband yagis did you use?
73,
Dan -- N3ND
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|