Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: hygain BN-86 balun

To: "'reflector -tower'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] FW: hygain BN-86 balun
From: "N2TK, Tony" <tony.kaz@verizon.net>
Date: Wed, 30 Oct 2013 09:03:17 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Matt,
BN-4000B is 3.25 x 6.25". I have never blown one.

BN-86 is significantly smaller. Easy to blow one if running 1.5KW on 40M and
left the antenna switch on your tribander with a BN-86.

73,
N2TK, Tony

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Matt
Sent: Tuesday, October 29, 2013 9:27 PM
To: 'reflector -tower'
Subject: [TowerTalk] FW: hygain BN-86 balun

I have acquired several Hy-Gain baluns that came along with second-hand Long
Johns.  The labels are long gone off of these.  Is there any easy way to
determine if they are BN-86 or BN-4000?

Thanks,
Matt
KM5VI


>>> If you run an amplifier, I would not use it any place that you could 
>>> not
easily replace it when it fails.

>>> John KK9A



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>