Re: [TowerTalk] Recommendations for an electric foldover winch?

[Patrick Greenlee <patrick_g@windstream.net>]

My variable speed corded 1/2 inch Milwaukee drill achieves right angle 
and gear reduction with an included accessory.  It can be "throttled" 
way back with the variable speed trigger.
Patrick NJ5G
On 7/31/2014 10:29 AM, Mike Reublin NF4L wrote:
> I think the Hawg turns too fast for that application. I'm trying to rig a 
> Dayton 3000# to use a wheelchair motor, continuously variable speed.
>
> My used HD-70HD came with a Dayton winch (made by Dutton Lainson). Granger 
> sells them as the StrongArm brand. Comes with or without the clutch. 
> http://www.grainger.com/search?searchQuery=strongarm#nav=%2Fsearch%2Fecatalog%2FN-1z07672Z1z05h7aZ1z0n379%2FNtt-strongarm%3F_%3D1406820204561%26sst%3Dsubset
>
> 73, Mike NF4L
>
> On Jul 31, 2014, at 10:31 AM, Fredric Serota <fserota@msn.com> wrote:
>
> > Like many on this list, I have changed my Fulton 1550 winch on my US Towers TX 
> > 455/TRX80 to a 2550 and then a drill driven 3000 worm gear. But the Hawg drill 
> > ate the winch on the second lifting operation and so I am now looking for a 
> > good AC winch. Any recommendations?
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk