Trav's Outfitter.... They KNOW boots!
No interest, just a happy customer.
http://travsoutfitter.com/products/464110-lacrosse-6-foreman
73,
Joe kk0sd
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
Donald Chester
Sent: Thursday, August 07, 2014 7:46 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Tower Climbing Boots
As I prepare to do some serious climbing work on my tower, footwear is now
a concern. When I erected 127' of Rohn 25G 30 years ago, I used the
steel-shank work boots I had on hand, size 9 1/2 M or 10 M as I recall,
without a second thought. Those are long worn out, so I purchased a new pair
of 10 M boots with steel shank. I used them for several weeks for other
outdoor projects and they are now broken in and very comfortable, but the
other day I did some preliminary climbing and it turns out that the soles of
the boots are too wide for both feet to easily fit on a rung at the same
time. I can wiggle my feet around each step and get both in place on each
rung as I go up, but IMO that isn't a very comfortable or safe way to be
climbing a 120' plus tower. The soles could be about a half-inch narrower
with no problem, but they just weren't made that way.
I set those boots side-by-side and measured the total width of the two soles
at 9.5 inches. I measured the width of another pair of work boots I have,
same size - 10M - but no steel shank, at 9.0 inches. It is very easy to
climb with those, but the lack of steel shank in the sole makes it
unbearably painful to stand on a tower rung any longer than a few minutes. I
went back to the store where I bought my new boots, looking for a pair of 9
1/2 M with narrower soles, but could find only ones without steel shank.
I tried looking on-line, but the descriptions are big on steel toes, but
little mention of steel shank, even with a Google search for "steel shank
boots". Most of the boot stores that claim to carry work boots seem
primarily concerned with fashion statements, like fancy cowboy boots and
other footwear, crap that would be useless for serious "work".
Very frustrating. Never thought finding a pair of suitable work boots for
tower work would be such an ordeal. Since a lot of people use Rohn 25G,
there must be footwear available for comfortably climbing this tower, like
there was 30 years ago. And my feet are probably smaller than average. Can
anyone tell me where they were able to find a satisfactory pair of tower
climbing boots?
Don k4kyv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|