Martin,
I will be down there in the next week if I can get ahold of Jeff at a
convenient time for him.
Thanks for the info, but I am trying to understand how those insulators with
their loops on each end insert into the tower leg and the base.
73,
Gordon, W2TTT
201.314.6964
-----Original Message-----
From: Martin A Flynn [mailto:maflynn@theflynn.org]
Sent: Monday, September 01, 2014 5:03 PM
To: w2ttt@att.net
Subject: [Bulk] Re: [TowerTalk] [Bulk] Re: tower insulators
Gordon,
Next time you are at N2MO, ask Jeff to see the power line insulators for
the wire antenna. I have ground off the metal ends off the fiberglass
rod and used them for loaded tower applications. If you want to grab a
set, reasonable ofer to the treasure are accepted!!
Failing that, McMaster-Carr sells machinable garolite rod that can be fitted
inside the leg of the tower.
Martin
W2RWJ
On 9/1/2014 12:22 PM, w2ttt@att.net wrote:
> Stan,
> So you use 3/8 fiberglass rod into each leg and the rods go into the concrete?
> If you have photos, that would be helpful.
> 73,
> Gordon, W2TTT
> 201.314.6964
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|