One brand of this equipment is EzTrench
Here is a link to their website
http://www.eztrench.com/wirecable-installers/
Robie - AJ4F
On Tue, Mar 7, 2017 at 7:35 AM, <w5prchuck@gmail.com> wrote:
> There is a machine similar to an edger that electricians use to cut the
> trench and insert the wire all in one pass. I think you can rent them.
> Maybe even at Home Depot. Might be worth buying one…
>
> Chuck W5PR
>
> Sent from Mail for Windows 10
>
> From: Herb Krumich via TowerTalk
> Sent: Monday, March 6, 2017 5:33 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] radials 160
>
> All winter I have been clearing out a large area to put radials down for a
> 160 meter antennaI built an antenna which looks like a T between two 90
> foot towersThe vertical leg is 65 feet and the horizontal is the same.
> I used it with only a few radials and was pleased with contacts to the
> west coast from Pa.So here is my questionWhat type of tool can I use to
> bury the radials an inch or so.My problem is there are quite a few surface
> rocks that I will have to deal with.Does Home Depot or Lowe's have
> something ?I was even just thinking about using a pic and draging it
> backwards
> Preferable no motors due to the rocksThanksHerb K2LNS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|