Take a look at:
http://www.heightstowers.com/accessories.html
They have 2" od aluminum in 12 and 24ft lengths with thickness of 1/8" and
1/4". The gotcha might be the fact that it has to be shipped via motor
freight.
Also check with metal suppliers. I talked to one in Seattle that was based
in I think LA and they carry aluminum tubing. The longest I could get was
20ft though rather than 24 which I thought was a bit odd.
Good luck.
Jim Pruitt
WA7DUY
On Fri, Mar 24, 2017 at 12:51 PM, Ed Stallman <ed.n5dg@gmail.com> wrote:
> I'm in need of a 2 in OD mast pipe for my Gen Pole . I was looking at EMT
> but I see the wall thickness is .065 . I will be lifting 115LB's , I will
> have a pulley at the bottom of the tower so the rope will be pulling
> striate down .. I'm not sure if EMT is strong enough for this job ? Anyone
> have a recommendation , something better then EMT . 2 inch OD 1/8 wall
> aluminum in a 10ft length is hard to find .
>
> Thanks Ed N5DG
>
>
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|