> "Please explain why the J bolt fabricator can bend the end of the J bolts
into the shape of a "J", but OTOH, the installer cannot put a very slight
bend into them."
Good question. They're only called "J-Bolts." In reality, nothing is bent
when used on the larger bolts for Pirod towers over 100 ft. Instead,
loading plates are welded at several sections along the bolt.
Paul, W9AC
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|