Towertalk
[Top] [All Lists]

Re: [TowerTalk] tower removal question

To: "fredkeen@ymail.com" <fredkeen@ymail.com>, "kj6y@aol.com" <kj6y@aol.com>, kj6y--- via TowerTalk <towertalk@contesting.com>, "wa9wsj@yahoo.com" <wa9wsj@yahoo.com>
Subject: Re: [TowerTalk] tower removal question
From: Wayne Kline <w3ea@hotmail.com>
Date: Sun, 5 May 2019 22:36:24 +0000
List-post: <mailto:towertalk@contesting.com>
Hi, not knowing ALL the facts…. IF I had a clear fall AREA I would cut it down 
with a 4” cutting wheel.    Wit h38 ft you should be able to salvage 35 ft .    
the antenna would be TOAST

I would NEVER climb the thing…



Mu .02  Wayne  W3EA



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Fred Keen via 
TowerTalk <towertalk@contesting.com>
Sent: Sunday, May 5, 2019 6:03:49 PM
To: kj6y@aol.com; kj6y--- via TowerTalk; wa9wsj@yahoo.com; 
towertalk@contesting.com
Subject: Re: [TowerTalk] tower removal question

You can pick up 3 sections of good used Rohn 25 in the Dallas area for$50-75 a 
section. How does that compare to lift delivery and rental?IF this involves 
removal for an elderly widow of an SK, then that's a different story. (Also 
consider is the base inconcrete?)Fred KC5YN

Sent from Yahoo Mail on Android

  On Sun, May 5, 2019 at 4:57 PM, kj6y--- via 
TowerTalk<towertalk@contesting.com> wrote:
With the cost of the lift and the time involved to remove and transport, and 
you'll only end up with 3 usable sections, providing the others aren't damaged. 
 Is it worth it.
Just my opinion.
Skip Bolnick, KJ6YCommunications Service Cowww.kj6y.com818-522-5421

In a message dated 5/5/2019 2:37:33 PM Pacific Standard Time, 
towertalk@contesting.com writes:

Hello Oh Wise Gents!I have the opportunity to obtain a 40, (38), foot Rohn 25G 
for free. But I will have to take it down. I have no idea how long it's been in 
the air but I would guess many years.The bottom section has TWO splits, one per 
leg, where it must have frozen and ruptured, so no climbing it. I'm considering 
a rented man lift to take each section off.So my question is "generally 
speaking", how difficult is it to separate the sections? Considering that I'll 
use a gin pole and a tower jack installation/removal tool.The antenna that is 
up there is what looks to be a VHF commercial ground plane, so no real weight 
was up there.
I know this is a leading question, but I'd like a little insight as to what I'm 
up against.What tricks does the experienced guys here have to suggest?Thanks 
much!!!Tom
_______________________________________________


_______________________________________________TowerTalk mailing 
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>