Hi Dick -
It looks like there are Amphenol PL-259 and N-series crimp connectors for
LMR-400 that allow crimping the center pin. See the DXE chart and the "Hex
crimp center pin" row in the chart at
https://static.dxengineering.com/global/images/chartsguides/d/dxe-ut-kit-crm
p2_ty.pdf
DXE carries at least the PL-259 types in their catalog.
73, Bob - W3YY
----------------------------------------------------------------------------
----------------------------------------------------------------------------
-----------------------------------------------------------------
-----Original Message-----
From: wc1m73@gmail.com [mailto:wc1m73@gmail.com]
Sent: Friday, September 06, 2019 5:46 PM
To: 'Richard (Rick) Karlquist'; 'W3YY'; towertalk@contesting.com
Subject: RE: [TowerTalk] Crimp on Coax connectors
You have to solder the center pin if it's not designed to be crimped, as is
the case with LMR-400 compatible UHF crimp connectors like the ones from
DXE.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|