Bill,
According to the Rohn Bible Rohn -55 it uses 6 pieces 5/8 X 3 ¼ “ NC
bolts
Wayne W3EA,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Bill via TowerTalk<mailto:towertalk@contesting.com>
Sent: Wednesday, March 25, 2020 5:33 PM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: [TowerTalk] Bolts for Rohn 55 guy bracket
I recently picked up a couple of used Rohn 55 guy bracket assemblies. However,
I believe the bolts that attach to the guy wire are undersized and probably
were for a Rohn 45 bracket. They appear to be 5/8 inches and the hole will
accept a 3/4 inch. So, I know I need a 3/4 inch grade 5 galvanized, but how
long should it be. Too long and the shank will noit be able to be snugged, too
short and I won't be able to put a nut on it. I can't find the info anywhere
on the Rohn site.
Help!
By the way, still looking for a third guy bracket assembly, Phillystran, a
rotor plate and top plate for Rohn 55.
K4XS/V31...soon.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|