Towertalk
[Top] [All Lists]

Re: [TowerTalk] Stainless Steel U Bolts

To: "'Steve Maki'" <lists@oakcom.org>, "'towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Stainless Steel U Bolts
From: "Ron Gorski" <ron-n9au@sbcglobal.net>
Date: Tue, 28 Jul 2020 04:58:43 -0000
List-post: <mailto:towertalk@contesting.com>
National Hardware model N100-221 from Lowe's is quite close. It will,
however, require some minor bending. Cost is about $5/pair
N9AU

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Steve Maki
Sent: Tuesday, July 28, 2020 2:12 AM
To: towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Stainless Steel U Bolts

Are you sure 2-1/2" inside width (rather than c-c) won't work? It's a fairly
common size.

https://www.fastenal.com/products/details/74624

-Steve K8LX

On 07/27/20 18:04 PM, felix1063@comcast.net wrote:

> Can anybody tell me if they might have a lead on some Stainless Steel 
> 1/4x20 U bolts spaced 2.5" on center?  These are not usually a 
> standard stock item and are used for the mounting of some Yagi Antennas.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>