Thank you Eddie...that's an interesting idea.Thanks also to the others that
replied. I think what I'm going to do is have the electrician do the trench and
the 220 line, then I'll put in the PEX and probably 3" or 4" plastic conduit
for the coax along with a length of pull line.This is in FL so I don't have to
worry about freezing but condensation is a concern so I'll provide a way to
drain the water out.Thanks again for the responses.73,Gary K9GS
-------- Original message --------From: Eddie <theseymours@live.com> Date:
10/15/20 5:45 PM (GMT-06:00) To: towertalk@contesting.com Subject: Re:
[TowerTalk] Run all in same trench? If using electrical conduit the sweeps can
be made with a heat gun. Price is good this way.On 10/15/20 6:30 PM, jimlux
wrote:> On 10/15/20 3:06 PM, John Simmons wrote:>> Or 4">>>>> It does start to
get pricey, though..>> 4" is $6/ft> 2" is $2/ft> 1" is $0.90/ft>> and those
sweep ells> 1" are $4> 2" are $9> 4" are $41>> The pipe is roughly linear with
size, but man, those fitting go as the > square>
_______________________________________________>>>>
_______________________________________________> TowerTalk mailing list>
TowerTalk@contesting.com>
http://lists.contesting.com/mailman/listinfo/towertalk>
.______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|