Make sure there's >12VDC at the rotor.
I have found that when all electrical issues seems OK, that it's time to look
at degreasing the thrust bearing, then loading it with new grease. Also look to
lubing any other areas where the mast might be metal-to-metal contact with
other surfaces.
GL
73
dan
k0dan
> On 04/21/2021 9:18 PM Wayne Kline <w3ea@hotmail.com> wrote:
>
>
> I have a Yaesu 2800DXA rotor on my 40/30 antenna. It’s rotor length to the
> antenna is 390 ft.
>
> I am using the 6 conductor 18 ga on the tower 80 ft. and 2X16 ga and
> 6X20ga with two extra wires added one to CCW and one to CW motor
> control. B MY issue is during the winter below 30 deg. F. many time to
> rotor will not turn in that cold WX
>
> The control box is ab Green Heron RT21 ??? bigger wire to the base ?
>
> Wayne W3EA,
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|