Towertalk
[Top] [All Lists]

Re: [TowerTalk] Taper conversions ...

To: Chuck Dietz <w5prchuck@gmail.com>
Subject: Re: [TowerTalk] Taper conversions ...
From: Tom Hellem <tom.hellem@gmail.com>
Date: Fri, 29 Jul 2022 08:29:41 -0600
List-post: <mailto:towertalk@contesting.com>
Joe-
The best tool I have found is AutoEZ by AC6LA.
Playing around with taper schedule in it is so easy it's ridiculous.
It's well worth the small price he asks for it.
For a 6 meter beam I don't think you are going to need to be very
concerned with wind survival, as long as you use common sense and don't
try to build an element with, say, 1/2" tubing as your largest diameter
section.
The only caveat I can offer is that NEC 2 engine will not give 100% precise
prediction
for the final length of DE, it will usually need to be tuned to length in
the field.

Tom
K0SN

On Fri, Jul 29, 2022 at 8:17 AM Chuck Dietz <w5prchuck@gmail.com> wrote:

> It is usually contained in whatever Yagi design program I use such as YO.
> I think there are stand-alone programs to create a taper schedule, but I
> didn’t find one in a quick search.
>
> Chuck W5PR
>
> On Fri, Jul 29, 2022 at 8:48 AM Joe Subich, W4TV <lists@subich.com> wrote:
>
> >
> > I have some 6M Yagi designs with uniform element diameters
> > that I would like to build using tapered elements I have on
> > hand from the aluminum pile.
> >
> > Does anyone have a pointer to converting the uniform element
> > lengths to an arbitrary taper schedule?
> >
> > 73,
> >
> >     ... Joe, W4TV
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>