Nick:
How did you make sure that you are in command mode? When
you are in command mode, if you enter the command INT, the
KAM should respond with TERM or HOST or something like that.
What you want is TERM. If it says anything else then enter
the command INT TERM and press enter. That will put the KAM
in terminal mode and you can then start writelog.
73.
Raj VE6RAJ
Nick Palomba wrote:
>
> Thanks for all the responses that I got.
>
> Here's what happens...
>
> I made sure I was in command mode... Nothing. I tried shutting the KAMplus
> on and off several time and nothing.
>
> I changed the config of the serial port in writelog.ini to 1200 baud and the
> light on the front moved from middle to left several times but still didn't
> work.
>
> That's it... Still not working...
>
> As far as the serial port goes... I know its working because I have tested
> it with other applications.
>
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Nick Palomba
> Sent: Wednesday, February 09, 2000 4:30 PM
> To: Writelog
> Subject: [WriteLog] FW: KamPlus and Rtty?
> Importance: High
>
> I can't get my TNC to initialize under RTTYwrite. I have a KAMplus and it
> works fine in either command or host mode in other applications (XPware or
> DX4win). I keep getting a message to turn it on and off and retry. Doesn't
> seem to matter how many times I try...
>
> Anyone else ever seen this issue? Thoughts?
>
> thx de K4MGN (K4 Medium Gun)
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|