John - How are you "tuning to the station?" When I double click on
a station in the band map, rig (FT1000D) goes right there, no
problems.
BTW, has anyone found any problems running CW? I plan on using
10.14E in ARRL CW next weekend, and won't be a happy camper
if it crashes. So far, I haven't found any problems (don't use telnet
here).
Also, I was playing with the CW decoder on my second computer,
a P-133 (a P-60 until recently - found a good deal on an Intel
Overdrive chip on Ebay), and it seems to work fine. I recall that a
350 Mhz PC was recommended as the minimum to use it. Am I
asking for trouble if I leave it on?
Tnx/Barry
On 12 Feb 00, WA9ALS - John wrote:
>
> Also, I can't "tune to station" from the bandmap. I haven't tried this
> in previous versions, so it's probably just me. Any tips on doing this?
> I now just have to chase it down with the tuning dial. Writelog reads
> freq OK from rig, so it seems that the interface is working.
>
> WA9ALS - John jfleming@shelbynet.net
> http://www.qsl.net/wa9als (now with Shack Cam!)
>
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|