Hmmmm..... so I need on port for rig control (currently working), another
for the FSK line, and a third for the PTT, or can the FSK and PTT share one
port? I need to look in the Writelog help in this area. The answer may be
there.
K8AC
Floyd Sense - Angier, NC
----- Original Message -----
From: "The Irvine's" <ve9wh@nbnet.nb.ca>
To: "WriteLog Reflector" <writelog@contesting.com>
Sent: Friday, October 27, 2000 7:39 PM
Subject: RE: [WriteLog] TS-850 FSK connection?
>
> Hi Floyd;
>
> I run an 850 and use the circuit exactly as it is in the Writelog help
file.
> You also need the RTTY line from a second comm. port to the RTTY jack on
the
> 850, if you don't use this the rig just keys with a steady tone and no
> diddle.
>
> Jim VE9WH / VE9TTY
> http://ve9wh.weblink.nbtel.net/dxclusters.html
> DX Cluster Telnet sites
>
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Floyd Sense
> Sent: Friday, October 27, 2000 6:55 PM
> To: writelog@contesting.com
> Subject: [WriteLog] TS-850 FSK connection?
>
>
>
> I've looked at the generic interface for FSK at the writelog.com site.
Can
> someone with a TS-850 running FSK tell me whether or not the opto-isolator
> circuit show will key the 850 FSK line, or do I need something else? Is
> the opto-isolator a Radio Shack part or must I get it elsewhere. Thanks.
>
> K8AC
> Floyd Sense - Angier, NC
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|