OK - well, whatever works! I'm using a single port, COM4, to drive the PTT
line and FSK line. The signals are being converted to the right level by my
DSP-599. Based on my previous problems, I can see why you can get away with
using the PTT on the rig control port.
Floyd Sense - Angier, NC
----- Original Message -----
From: "The Irvine's" <ve9wh@nbnet.nb.ca>
To: "WriteLog Reflector" <writelog@contesting.com>
Sent: Friday, October 27, 2000 9:59 PM
Subject: RE: [WriteLog] TS-850 FSK connection?
>
> Hi Floyd
>
> No the PTT on mine is from Comm. 1 and the FSK is from Comm. 2. Comm1 also
> does my rig control.
>
> Jim VE9WH / VE9TTY
> http://ve9wh.weblink.nbtel.net/dxclusters.html
> DX Cluster Telnet sites
>
> -----Original Message-----
> From: Floyd Sense [mailto:sentek@sprintmail.com]
> Sent: Friday, October 27, 2000 8:58 PM
> To: The Irvine's; WriteLog Reflector
> Subject: Re: [WriteLog] TS-850 FSK connection?
>
>
> Hmmmm..... so I need on port for rig control (currently working), another
> for the FSK line, and a third for the PTT, or can the FSK and PTT share
one
> port? I need to look in the Writelog help in this area. The answer may
be
> there.
>
> K8AC
> Floyd Sense - Angier, NC
> ----- Original Message -----
> From: "The Irvine's" <ve9wh@nbnet.nb.ca>
> To: "WriteLog Reflector" <writelog@contesting.com>
> Sent: Friday, October 27, 2000 7:39 PM
> Subject: RE: [WriteLog] TS-850 FSK connection?
>
>
> >
> > Hi Floyd;
> >
> > I run an 850 and use the circuit exactly as it is in the Writelog help
> file.
> > You also need the RTTY line from a second comm. port to the RTTY jack on
> the
> > 850, if you don't use this the rig just keys with a steady tone and no
> > diddle.
> >
> > Jim VE9WH / VE9TTY
> > http://ve9wh.weblink.nbtel.net/dxclusters.html
> > DX Cluster Telnet sites
> >
> > -----Original Message-----
> > From: owner-writelog@contesting.com
> > [mailto:owner-writelog@contesting.com]On Behalf Of Floyd Sense
> > Sent: Friday, October 27, 2000 6:55 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] TS-850 FSK connection?
> >
> >
> >
> > I've looked at the generic interface for FSK at the writelog.com site.
> Can
> > someone with a TS-850 running FSK tell me whether or not the
opto-isolator
> > circuit show will key the 850 FSK line, or do I need something else?
Is
> > the opto-isolator a Radio Shack part or must I get it elsewhere.
Thanks.
> >
> > K8AC
> > Floyd Sense - Angier, NC
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
>
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|