Sure, although I think there is a limit of 8. It's in the HELP section,
under INI:
The COMn:= settings are used by the WriteLog Packet window and by the
RTTY window. They are not used for rig control.
COM1:=9800,n,8,1,
COM2:=4800,e,7,1,
There are 4 "slots" available for WriteLog rig interfacing. By default,
CommSlot1 is COM1:, but you can change that by changing the number on
the right of the equal sign. These settings are not used for RTTY or for
packet
CommSlot1=1
CommSlot2=2
?In this example, the third and fourth slots are on COM7 and COM8
CommSlot3=7
CommSlot4=8
------------------------------------------------------------
John - VP5RY - VP5/WA9ALS - WA9ALS
VP5 photos: http://www.qsl.net/wa9als/vp5photos.htm
email: jfleming@shelbynet.net
homepage: http://www.qsl.net/wa9als (NEW - DX Telnet Setup page!)
logbook: http://www.qsl.net/wa9als/search.htm
----- Original Message -----
From: "Bill" <w9ol@billnjudy.com>
To: <writelog@contesting.com>
Sent: Monday, January 22, 2001 7:25 PM
Subject: [WriteLog] extra comports
>
> Is there a way to get Writelog to use my Byterunner comports 5 through
> 12?
> Or even a couple of them?
>
>
>
>
> ------------------------------------------------------------
> A meeting is an event at which the minutes are kept and the hours are
> lost.
> ------------------------------------------------------------
>
> Bill H. in Chicagoland
> w9ol@billnjudy.com FireBrick@telocity.com w9ol@telocity.com
>
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|