After I hit send I realized I left out some important information.
The CommSlot1=1, etc commands are located in the writelog.ini file under the
[PORTS] heading. This information is located in the help file for "INI".
Alan N5NA
----- Original Message -----
From: "A. Sewell" <n5na@telepath.com>
To: <writelog@contesting.com>
Sent: Monday, January 22, 2001 18:47 PM
Subject: Re: [WriteLog] extra comports
> Bill,
>
> From the Writelog help file:
> ----------------------
> There are 4 "slots" available for WriteLog rig interfacing. By default,
> CommSlot1 is COM1:, but you can change that by changing the number on the
> right of the equal sign. These settings are not used for RTTY or for
packet
>
> CommSlot1=1
> CommSlot2=2
>
> In this example, the third and fourth slots are on COM7 and COM8
> CommSlot3=7
> CommSlot4=8
> ---------------------
> I believe COM8 is the highest supported.
>
> Regards,
>
> Alan N5NA
>
> ----- Original Message -----
> From: "Bill" <w9ol@billnjudy.com>
> To: <writelog@contesting.com>
> Sent: Monday, January 22, 2001 18:25 PM
> Subject: [WriteLog] extra comports
>
>
> >
> > Is there a way to get Writelog to use my Byterunner comports 5 through
> > 12?
> > Or even a couple of them?
> >
> >
> >
> >
> > ------------------------------------------------------------
> > A meeting is an event at which the minutes are kept and the hours are
> > lost.
> > ------------------------------------------------------------
> >
> > Bill H. in Chicagoland
> > w9ol@billnjudy.com FireBrick@telocity.com w9ol@telocity.com
> >
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|