I suspect what's happening is that in your Port Setup dialog,
the LPT port number you have set in the DVK column is not LPT1.
Said another way, the LPT port selected in the DVK column is
the one that gets the pin 16 PTT signal.
Wayne
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Charles Fulp
> Sent: Friday, May 25, 2001 02:09
> To: 'Write Log'
> Subject: [WriteLog] PTT
>
>
>
> Im not getting PTT operation using pin 16 on the LPT .
> I have selected On LPT pin 16/COMMRTS and tried various PTT
> to CW delays
> including 0.
> I have selected LPT1 on the Port set up. and tried
> checking Allmode PTT on CW Port RTS.
>
> Any reminders what I am missing?
> Tried another program that keys the PTT via pin 16 and it
> works fine, so I
> trust my SO2R box
> is working.
>
> No rush, WPX doesn't start until 0000 Saturday(UTC)
>
> 73 Chas K3WW
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|