At 00:18 -0500 11/01/2001, Frank Grossman (WB2BXO) wrote:
>
>So, the required serial number syntax is %n -- not just %?
If you enter just the %, how is the program supposed to know whether you want
the serial number, call sign (%C), check for dupe (%B) and so forth?
>I don't think
>leading zeros are really needed in SS exchanges, though they reduce
>confusion in other contests. Must I specify %1 to transmit the number?
The WriteLog help file CLEARLY states:
'The memories have the following special properties if there is a "%" character
followed by a:
'digit n (in the range 1 through 5)
(Seems pretty plain to me - the '%' character FOLLOWED BY A DIGIT n - K8AJS)
'the current QSO number is substituted for the % when that message is sent. The
number sent will be preceded by enough "T" characters in Morse (or "0" digits
in RTTY) to ensure that at least n characters are sent in the number. For
example, if the sequence number is one, and there is a "%3" in the F3 field,
then pressing F3 will send "TT1". This is for contests that require a "three
digit serial number".'
You can set it for however many digits you want, from one through five. I don't
do Sweepstakes, but in other contests I've found that three digits padded with
zeroes results in less confusion on the other end and a better rate. As you
say, in SS it may not be as much of a consideration.
Hope this helps.
--
J o h n B a s t i n K 8 A J S
jbastin@sssnet.com K8AJS@arrl.net
http://www.geocities.com/~tarquin
|