Have you double clicked on the volume control , gone to "Options",
"Proberties" and checked to make sure that "Line-In" is checked. Often the
little things are the worst.
At 10:03 PM 11/6/01 -0600, Roger F. Wise wrote:
>I am stumped with this problem. First I am using Wtite-Log V 10.28d.
>Windows 98, Gateway Pentium II, Creative Labs Sound Blaster PCI64. I can
>record to the sound card through Wtite-Log in making my different SSB
>messages for a SSB contest. This seems to work ok. Sometimes I get a loop
>going and at other times not. By a loop I mean it keeps repeating. This is
>not my cq F11 anyone of the function keys seems to do it at random. I can
>live with that (ESC) key will stop it. My problem is that I cannot for the
>life of me make the CW decoder even show a signal. I have a rig blaster set
>up. I even by- passed that and ran from my audio out to audio in on the
>computer. I know that works because I can hear it through computer outboard
>speakers.
>I downloaded the test program from Write-Log site to check out if my sound
>board to see if it will work. Score F7 not bad. I went into the volume
>control window and did all the right stuff. Mic boost and no mute checked.
>What I did find out was under options,/ properties,/ recording /there is no
>line in box to check. I am wondering if this is my problem, When I close
>out of this window I get a different volume control window at times. That
>one I will never understand. At one time I did have this part of write-log
>working the cw decoder. At this stage without any audio in I cannot run
>digital through the sound board. Folks I am at end wits with this problem.
>If anyone else has or had a problem HELP!!!!!!! To add one more thing.
>Just trying to run the sound recorder will not work either. I cannot even
>make that thing work. Only works through write-log. 73 and thanks for
>reading this. Roger KI0F
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
Jim Rhodes K0XU
jim@rhodesend.net
|