----- Original Message -----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: <w5xd@writelog.com>; "WriteLog Reflector" <Writelog@contesting.com>
Sent: Thursday, November 08, 2001 1:09 PM
Subject: [WriteLog] QTC send BROKE with DXP38
> Thanks to Wayne, N2WK, for finding this problem.
>
> WriteLog will not send QTC's correctly when using a DXP38.
>
> I just confirmed it. ALT-S brings up the QTC send window
**** Guys, we talked about this LAST YEAR! NOTE NOV 9 , *2000* And Don,
you were in on it! HI See below from same time last year:
----- Original Message -----
From: "Don Hill" <aa5au@msn.com>
To: "WriteLog Reflector" <Writelog@contesting.com>
Sent: Thursday, November 09, 2000 10:20 PM
Subject: [WriteLog] QTC problem with DXP-38
>
> I've been practicing sending and receiving QTC's on both of my
> radios/computers for tomorrow's upcoming WAE RTTY contest.
>
> I am finding that WriteLog does not send QTC's with a DXP-38 as
> the TNC. It works fine with a PK232.
> What I am finding is that WriteLog sends the first line with the QTC
> number OK and starts the first QTC. It sends the date, callsign and
> begins to send the serial number on the first QTC, but stops and
> only sends diddles from then on. Tried it several times.
>
DITTO, basically! The very first time I tried it, it did EXACTLY as Don
described - just diddled at the end of the FIRST serial number - I had
10 QTCs to send at that time.
Then all other times I tried it, with LESS THAN 10 QTCs (e.g. 2,3,or 5),
all but the last one went OK, but it hung with the LAST serial number
and stuck there!
At this point I can't remember whether I used the DXP in last year's WAE
or not!
Wayne, can you help us on this one? Thanks Don - you made my evening!
;-)
- John
|