I just used WL with a KAM at ZF2NT's location. Mostly, Writelog
changed the KAM back to terminal mode. I did find that clicking
FSK-Rev and then FSK-Norm! after startup helped it get going.
73, doug
From: "John L Merrill" <n1jm@arrl.net>
To: <writelog@contesting.com>
Date: Sun, 10 Feb 2002 07:05:34 -0500
Steve:
The last time I used my KAM was with version 9.xx. I am quite sure when I
exited Writelog it automatically changed it back to terminal mode. I think
something has changed in ver 10 or the latest upgrade. I'll let you know
what I find out. I actually couldnt see much differnce as far as copying
signals between MMTTY on a PROII and the KAM on a 1000D.
73, John N1JM
-----Original Message-----
From: Steve Moore KB9JD [mailto:smoore@abcs.com]
Sent: Sunday, February 10, 2002 6:12 AM
To: John L Merrill
Cc: writelog@contesting.com
Subject: Re: [WriteLog] KAM
John
My KAM wants to stay in host mode and its a pain to get it back to terminal
mode. I would be curious to what your comparison was. If you find an easy
way to
get it back to terminal mode let me know.
73's
Steve KB9JD
John L Merrill wrote:
> I've been using MMTTY for awhile but I decided to go back to my old KAM
just
> for a comparison. When one exists frome writelog, does not the program
> supposed to take the KAM out of Host mode/RTTY and revert it back to
> terminal/command mode?
>
> John N1JM
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <writelog@contesting.com>
Version: 6.0.323 / Virus Database: 180 - Release Date: 2/8/2002
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|