For these two radios, a mono plug may work, but many other radios that use a
stereo jack for the key / keyer paddle input may not.
If you use a stereo 1/4" plug at the radio end of the cable, it will work in
any radio. (Icom, Yaesu, Kenwood, etc.)
N5NJ
----- Original Message -----
From: "Cliff Ahrens" <cahrens@packetx.net>
To: <writelog@contesting.com>
Sent: Sunday, November 24, 2002 10:51 PM
Subject: [WriteLog] W5XD keyer - 756PRO - another suggestion
> Thanks also to Tom K4XG for his help on the W5XD keyer CW output cabling.
> Tom uses mono plugs on his 756PRO and 756PROII. I used WA0SXV's
> configuration (see my earlier post), but thought I'd share Tom's
suggestion
> as an alternative configuration for the PRO and PROII.
>
> Thanks again to everyone for their help.
>
> 73, Cliff K0CA
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|