Setting up AR User (A FREE program) to feed cluster spots into Writelog is real
easy.
1. Start AR User to any cluster node you choose.
2. In Writelog, Packet Terminal window, Select File and Telnet
In the IP box type:
127.0.0.1 port 7300
click on OK
(IP address of 127.0.0.1 Port 7300 is your local host address on your computer)
It should be the same for everyone.
AR User has the easiest Filtering Setup I've found.
----- Original Message -----
From: "Ron K5DJ" <k5dj@austin.rr.com>
To: "'FireBrick'" <w9ol@billnjudy.com>
Sent: Monday, February 23, 2004 10:57 AM
Subject: RE: [WriteLog] will the person who asked me how
> Bill, if/when you get some info on setting this up, Pse send me
> a copy. I would like to have this on hand in case someone asks
> later on..
>
> 73, de Ron K5DJ
> =============================
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of FireBrick
> Sent: Monday, February 23, 2004 16:51
> To: Writelog List
> Subject: [WriteLog] will the person who asked me how
>
>
> To use AR User to feed spots into Writelog please email me.
> I'm having a bad 'wrong key' day.
>
>
> -----------------------------------------------------
> Seen it all. Done it all. Can't remember most of it.
> -----------------------------------------------------
>
> Bill H. in Chicagoland
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|