Daniel,
If you are configuring Telnet, you should not be trying to connect to the
Internet Logbook. I assume you are using Telnet to access Packet spots from a
cluster.
To do that, click on 'Window,' then Packet Window.
At this point, a new window will open called 'WriteLog Packet Terminal.'
In the WriteLog Packet Terminal window, click on 'File' and select 'Telnet.'
This will produce a dialog box and you can enter in the IP address and port for
the cluster to which you hope to telnet to.
Hope this helps...
Scot, K9JY
gilles <ve2lx@sympatico.ca> wrote:
hello to all
PEASE HELP help
we tried to configure TELNET but did not successed.
we go tools/connect to internet logbook
then in the window 4 items to fill
1......name of operator = A
2......address of the URL ( we choose...... 66.1.40.120 from ab7aa
from internet page
3......computer anme fond by W.L. automatically
4......protocol......we choose......Tcp/IP
but then there is always a popup window not sastisfied
and answering activate disconnect from the internet lobook
is there a member of the groupe that could give an help
> Daniel ve2sb sent by ve2lx
> please answer to him at ve2lx@sympatico.ca
> and to the groupe if it is of the groupe interest
> I am in moving periode having a knew house at the suburn
Daniel VE2SB by VE2LX
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|