I went to 19.2 and that seems to have fixed it. Wish I would have done that
a long time ago.
John wa5zup
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of wa5zup
Sent: Saturday, January 05, 2008 6:22 AM
To: Writelog
Subject: [WriteLog] Writelog intermittently reads the wrong frequency
fromradio
I have an intermittent problem that has been with me for a while. It did it
with 10.61 and still does it with 10.64.
Every once in a while the entry window frequency and the frequency on the
band map changes to a frequency way out of the ham bands. It does this
while in receive mode, so it is not RF related. Evidently writelog reads
the frequency wrong sometimes when it poles the radio.
I am running a Icom proIII, and a SteppIR. The baud rate is set at 9600.
No other program does this except writelog.
I thought about changing the baud rate. Should I try faster or slower?
Any ideas?
Thanks
John wa5zup
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|