Bill,
In addition to "AutoClearOnTuneMinHz=500" try adding "TuningDetectionCout=3"
to your [Entry] section. According to the WL help manual,
"TuningDetectionCount is the number of consecutive polls of the rig that
must be tuning to decide the operator really is tuning." If this command is
missing WL cannot determine that VFO movement has occurred and the entry in
the Call field should be cleared.
73,
Gary AL9A
----- Original Message -----
From: "William Maurer" <wb6jjj@sbcglobal.net>
To: <writelog@contesting.com>
Cc: "'Jerry Bliss'" <jerry.bliss@gmail.com>
Sent: November 22, 2008 6:37 PM
Subject: Re: [WriteLog] AutoClearOnTuneMinHz=n
>I tried this phrase "AutoClearOnTuneMinHz=500" but I could not get it to
> work - I tried a couple of different locations in the .ini file. I called
> Jerry, K6III, this afternoon since he is a close neighbor to make sure
> that
> I placed it in the correct location. He said that his is in the [ENTRY]
> section. I tried that section with no success. Is there some other
> command
> that needs to precede this command? Any help would be appreciated.
>
> Bill, WB6JJJ
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Jerry Bliss
> Sent: Monday, October 27, 2008 8:31 PM
> To: writelog@contesting.com
> Subject: [WriteLog] AutoClearOnTuneMinHz=n
>
> Some (Gary?) recently mentioned on WL Reflector the use of
> AutoClearOnTuneMinHz=n in the INI file (see below).
> THANKS for that hint... works slick on my old version 10.62h. This will
> save
> a lot of Alt-W keying. I wish I had read
> this reflector posting before CQWW this past weekend!
> 73 de Jerry, k6iii
>
> ===================================================================
>> I also use > another command in my writelog.ini file in the [Entry]
> block,
>> AutoClearOnTuneMinHz=n, that clears the call in the CALL field when the
>> VFO is tuned n Hz away from the current freq. Didn't realize until this
>> contest that this command will clear the CALL field for me after mapping
> the call
>> to the band map by just turning the VFO knob. Saves the trouble of
> hitting
>> the Alt-W combo all the time. Live and learn!
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|